Remove
Drive belt from pulley – see operation "Drive Belts Remove and Install" in group J.
Suction hose from pump – clip (fluid escapes close openings).
Pressure hose from pump – banjo nut and washer (fluid escapes close openings).
Adjuster plate from bracket – two bolts.
Pulley from pump – nut.
Pump assembly from bracket – three bolts.
Install
Pump assembly to bracket – three bolts.
Pulley to pump – nut.
Adjuster plate to bracket – two bolts.
Pressure hose to pump – banjo washer and nut.
Suction hose to pump – clip.
Drive belt to pulley.
Bleed hydraulic system and check for leaks – see operation "Hydraulic System Bleed".