With engine stationary fill fluid reservoir and let fluid settle for at least two minutes.
Caution
Hydraulic pump must not be allowed to run dry.
Start engine and let it run for a few seconds and turn off.
Do not turn steering wheel at this time.
Top up fluid if necessary.
Repeat procedure until fluid level remains constant after running engine.
Raise front end of vehicle so that wheels are off ground.
Start engine and slowly turn steering wheel right and left lightly contacting wheel stops - add fluid if necessary.
Lower vehicle and turn steering wheel slowly from lock to lock several times.
Stop engine - check fluid level and refill as required.
If fluid is very foamy allow to stand a few minutes and repeat procedure.
