Home ReviewsRefund
Home/Opel/Antara/Opel Antara I (2007-2011)/Repair manual/Heating, Ventilation/High-Blower Relay Replace
Contents Wiring diagrams Section: Heating, Ventilation All sections

High-Blower Relay Replace Opel Antara I

Heating, Ventilation 2 illustrations

High-blower Relay Replace

Remove

  1. Disconnect the negative battery cable.
  2. The relay is located in front of the blower motor.
  3. Remove the glove box lower panel cover. Refer to Instrument Compartment Replace .
  4. Separate the relay from the connector.
  5. Remove the screw with the high-blower relay.

Install

  1. Install the screw with the high blower relay.
  2. Connect the electrical connector.
  3. Install the glove box lower panel cover. Refer to Instrument Compartment Replace .
  4. Connect the negative battery terminal.

More articles — Heating, Ventilation, Air Conditioning (HVAC)