Blower Motor Replace Opel Antara I

Blower Motor Replace

Remove

1. Disconnect the negative battery cable.
2. Remove the glove box. Refer to Instrument Compartment Replace .
3. Remove the foot well upper cover.
4. Remove the motor and the seal from the heater/air distribution case by gently pulling the motor straight down and out.
5. Remove the screws that secure the motor to the heater/air distributor case.

Install

1. Install the blower motor and the seal with the shock mount pads in the heater/air distributor case. Hold the blower motor in position.
2. Install the screws to secure the blower motor to the heater/air distributor case.

Tighten

Tighten the blower motor-to-heater/air distributor case screws to 6 N•m (53 lb-in).

3. Connect the blower motor electrical connector.
4. Connect the negative battery cable.
5. Confirm that the blower motor operates properly.
6. Install the foot well upper cover.
7. Install the glove box. Refer to Instrument Compartment Replace .