Front Door Window Switch Replacement Opel Agila B

Remove

1. 1. Remove upper trim panel (1) from door • Release clip, locator
2. 2. Remove inner trim panel from door • Remove 2x screw (2) • Remove 2x clip (3) • Release 9x clip, locator • Disconnect harness connector from power window switch

3. 3. Remove trim panel from inner trim panel • Remove 4x screw (1) • Release 4x clip (2)

4. 4. Remove power window switch (1) from trim panel • For driver side, release 6x clip • For passenger side, release 2x clip

Note. Illustration shows driver side.

Install

5. 5. Install new power window switch (1) to trim panel • For driver side, secure 6x clip • For passenger side, secure 2x clip

Note. Illustration shows driver side.

6. 6. Install trim panel to inner trim panel • Secure 4x clip (2) • Install 4x screw (1)

7. 7. Install inner trim panel to door • Connect harness connector to power window switch • Secure locator, 9x clip • Install 2x clip (3) • Install 2x screw (2)
8. 8. Install upper trim panel (1) to door • Secure locator, clip