How to Replace the Oil Pressure Sensor Opel Agila A

Remove

1. 1. Open bonnet
2. 2. Disconnect battery • Detach ground cable • 1 fastening nut
3. 3. Detach air intake hose. • From air cleaner housing • 1 fastening clamp
4. 4. Place collecting basin underneath.
5. 5. Remove oil pressure sensor (1) • Remove 1 wiring harness plug • Unscrew from cylinder head

Install

6. 6. Install oil pressure sensor • Screw into cylinder head – Tightening torque 32 Nm • Attach 1 wiring harness plug
7. 7. Connect air intake hose • To air cleaner housing • 1 fastening clamp – Tightening torque 3,5 Nm
8. 8. Connect battery • Tightening torque 5,5 Nm
9. 9. Program volatile memories
10. 10. Close bonnet.