Home ReviewsRefund
Home/Opel/Agila/Opel Agila A (2000-2007)/Repair manual/Fuel Injection Systems/How to Remove and Install the Preheating System Control Unit
Contents Wiring diagrams Section: Fuel Injection Systems All sections

How to Remove and Install the Preheating System Control Unit Opel Agila A

Fuel Injection Systems 1 illustration

Remove

  1. 1. Open bonnet
  2. 2. Detach relay holder (1) from bracket • 1 clip • Lay aside relay holder
  3. 3. Remove preheating system control unit (2) • Unclip from bracket • 1 wiring harness plug

Install

  1. 4. Install preheating system control unit • 1 wiring harness plug • Clip into bracket
  2. 5. Attach relay holder to bracket • 1 clip
  3. 6. Close bonnet.

More articles — Engine and Engine Aggregates