ADJUSTMENT AFTER INSTALLATION
- Inspect the brake pedal height and play. Adjust it if the measurement value is not the standard. Refer to " «INSPECTION AND ADJUSTMENT»(ref-675601-S07977721252014120500000) ".
- Perform the accelerator pedal released position learning procedure. Refer to " «WORK PROCEDURE»(ref-675578-S09002658642014120500000) ".
Scheme 1
Scheme 2
| CAUTION | All hoses and tubes must be free from excessive bending, twisting and pulling. Make sure there is no interference with other parts when turning steering clockwise and counterclockwise. The brake system is an important safety system. If a brake fluid leak is detected, always disassemble the parts. Replace applicable part with a new one, if necessary. Do not bend or twist brake hose sharply, or strongly pull it. When removing components, cover connections so that no dirt, dust, or other foreign matter gets in. Do not reuse drained brake fluid. |
Inspect the brake pedal height and play. Adjust it if the measurement is not the standard. Refer to " INSPECTION AND ADJUSTMENT ".
