Power Window Control System: Removal & Installation Nissan Note E12

INSTALLATION

Installation is in the reverse order of removal.

Note. When the main power window and door lock/unlock switch is removed or replaced, it is necessary to perform the initialization procedure. Refer to " WORK FLOW ".

Scheme 5

Scheme 6

1. Remove power window and door lock/unlock switch (RH) finisher door handle pull escutcheon.
2. Remove screw (B) from power window and door lock/unlock switch (RH) finisher.
3. Remove power window and door lock/unlock switch (RH) finisher (1) using a suitable tool (A).
4. Disconnect the harness connector from the power window and door lock/unlock switch (RH).
5. Release pawls and remove power window and door lock/unlock switch (1) from power window and door lock/unlock switch (RH) finisher (2) using a suitable tool. CAUTION: Do not bend back the pawls on the switch finisher too far or damage may occur.

Installation is in the reverse order of removal.

Scheme 7

Scheme 8

1. Remove rear power window switch door handle pull escutcheon.
2. Remove screw (A) from rear power window switch finisher.
3. Remove rear power window switch finisher (1) using a suitable tool (B).
4. Disconnect the harness connector from the rear power window switch.
5. Release pawls and remove rear power window switch (1) from rear power window switch finisher (2) using a suitable tool. CAUTION: Do not bend back the pawls on the switch finisher too far or damage may occur.

Installation is in the reverse order of removal.