Home ReviewsRefund
Home/Nissan/Maxima/Nissan Maxima A32 (1994-2000)/Repair manual/Mechanical/Cooling System Bleeding
Contents Wiring diagrams Section: Mechanical All sections

Cooling System Bleeding Nissan Maxima A32

Mechanical ~101 words
  1. On vehicles with manual A/C, set temperature control lever in full HOT position to open heater valve. On models with automatic A/C, set temperature display at full HOT position and turn ignition off to open heater valve.
  2. Fill radiator slowly to allow air in system to escape. Install and tighten radiator cap. Run engine until warm. Race engine 2 or 3 times under no load. Stop engine. Allow engine to cool. Remove radiator cap. Fill radiator as necessary. Install and tighten radiator cap.
  3. Repeat step 2) if necessary. Recheck coolant level and refill as necessary. Fill coolant reservoir.