GENERAL SPECIFICATIONS
| Item | Specification | |||
|---|---|---|---|---|
| Transmission model | F1CJA-2-D3W | F1CJA-1-B3X | W1CJA-1-B3X | |
| Torque converter | Type | 3-element, 1-stage, 2-phase | ||
| Stall torque ratio | 1.986 | 1.826 | ||
| Lock-up | Present | |||
| Transmission type | Forward automatic continuously variable (steel belt-driven), reverse 1 speed | |||
| Pulley ratio | Forward | 2.349 - 0.394 | ||
| Reverse | 1.750 | |||
| Final reduction gear ratio | 5.407 | 6.120 | ||
| Transfer type | Center differential type full-time AWD | |||
| Transfer gear ratio | 0.425 | |||
GENERAL SPECIFICATIONS
SERVICE SPECIFICATIONS
| Item | Standard value mm (in) | |
|---|---|---|
| Reverse brake clearance | 1.2 - 1.5 (0.05 - 0.06) | |
| Total end play | 0.25 - 0.55 (0.010 - 0.022) | |
| Differential preload | 0.17 - 0.23 (0.007 - 0.009) | |
| Reduction gear preload | 0.11 - 0.17 (0.004 - 0.006) | |
| Mounting bore diameter of reduction gear bearing outer race | Converter housing side | Ø61.949 - 61.979 (2.4389 - 2.4401) |
| Transaxle case side | ||
| Mounting bore diameter of differential side bearing outer race | Converter housing side < F1CJA > | Ø67.949 - 67.979 (ø2.6752 - 2.6763) |
| Converter housing side < W1CJA > | Ø84.941 - 84.976 (ø3.3441 - 3.3455) | |
| Transaxle case side | Ø67.949 - 67.979 (ø2.6752 - 2.6763) | |
| Mounting shaft diameter of reduction gear bearing inner race | Converter housing side | Ø30.008 - 30.029 (1.1814 - 1.1822) |
| Transaxle case side | ||
| Mounting bore diameter of differential side bearing inner race | Converter housing side < F1CJA > | Ø40.026 - 40.051 (ø1.5758 - 1.5768) |
| Converter housing side < W1CJA > | Ø60.032 - 60.078 (ø2.3635 - 2.3653) | |
| Transaxle case side | Ø40.026 - 40.051 (ø1.5758 - 1.5768) | |
SERVICE SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
| Item | N.m |
|---|---|
| Detent spring mounting bolt | 6.9 (61 in-lb) |
| Plug | 7.5 (66 in-lb) |
| Clip mounting bolt | 5.9 (52 in-lb) |
| Oil pump mounting bolt (M8 x 1.25 x 70 mm) | 19 (14 ft-lb) |
| Oil pump mounting bolt (M8 x 1.25 x 36 mm) | 28 (21 ft-lb) |
| Control valve assembly mounting bolt | 7.9 (70 in-lb) |
| Manual valve lever mounting nut | 22.1 (16 ft-lb) |
| Bracket mounting bolt | 7.9 (70 in-lb) |
| Oil strainer mounting bolt | 7.9 (70 in-lb) |
| Oil pan mounting bolt | 7.9 (70 in-lb) |
| Drain plug | 34.3 (25 ft-lb) |
| Oil guide mounting bolt | 5.9 (52 in-lb) |
| Bracket mounting bolt | 26 (19 ft-lb) |
| Baffle plate mounting bolt | 19 (14 ft-lb) |
| Oil pump cover mounting bolt | 19 (14 ft-lb) |
| Chain cover mounting nut | 5.9 (52 in-lb) |
| Converter housing mounting bolt | 45 (33 ft-lb) |
| Manual control lever mounting nut | 17.2 (13 ft-lb) |
| Transmission range switch mounting bolt | 5.5 (49 in-lb) |
| Primary pulley speed sensor mounting bolt | 5.9 (52 in-lb) |
| Secondary pulley speed sensor mounting bolt | 5.9 (52 in-lb) |
| Transmission fluid cooler mounting bolt | 4.2 (37 in-lb) |
| Plug | 7.5 (66 in-lb) |
| Oil filler tube mounting bolt | 8.5 ± 3.5 (75 ± 31 in-lb) |
| Control cable bracket mounting bolt | 25 ± 4 (18 ± 2 ft-lb) |
| Harness bracket mounting bolt | 25 ± 4 (18 ± 2 ft-lb) |
| FR roll stopper bracket mounting bolt | 90 ± 10 (66 ± 7 ft-lb) |
| RR roll stopper bracket mounting bolt | 90 ± 10 (66 ± 7 ft-lb) |
| Reduction gear nut | 250 (184 ft-lb) |
| Final gear mounting bolt | 130 (96 ft-lb) |
FASTENER TORQUE SPECIFICATIONS
| Item | N.m |
|---|---|
| Transfer mounting bolt | 68 ± 9 (50 ± 7 ft-lb) |
| Cover mounting bolt | 12 ± 2 (106 ± 18 in-lb) |
TRANSFER TORQUE SPECIFICATIONS