SNAP RING, SPACER AND THRUST WASHER FOR ADJUSTMENT
| Thickness mm (in) | Identification | Thickness mm (in) | Identification |
|---|---|---|---|
| 2.2 (0.09) | 2.8 (0.11) | ||
| 2.4 (0.09) | 3.0 (0.12) | ||
| 2.6 (0.10) | |||
SNAP RINGS SPECIFICATIONS (FOR ADJUSTMENT OF REVERSE BRAKE)
| Thickness mm (in) | Identification | Thickness mm (in) | Identification |
|---|---|---|---|
| 3.58 (0.141) | 4.26 (0.168) | ||
| 3.75 (0.148) | 4.43 (0.174) | ||
| 3.92 (0.154) | 4.60 (0.181) | ||
| 4.09 (0.161) | 4.77 (0.188) |
NEEDLE BEARINGS SPECIFICATIONS (FOR ADJUSTMENT OF TOTAL END PLAY)
| Thickness mm (in) | Identification | Thickness mm (in) | Identification |
|---|---|---|---|
| 0.40 (0.016) | 0.96 (0.038) | ||
| 0.44 (0.017) | 1.00 (0.039) | ||
| 0.48 (0.019) | 1.04 (0.041) | ||
| 0.52 (0.021) | 1.08 (0.043) | ||
| 0.56 (0.022) | 1.12 (0.044) | ||
| 0.60 (0.023) | 1.16 (0.046) | ||
| 0.64 (0.025) | 1.20 (0.047) | ||
| 0.68 (0.027) | 1.24 (0.049) | ||
| 0.72 (0.028) | 1.28 (0.050) | ||
| 0.76 (0.030) | 1.32 (0.052) |
ADJUSTING SHIMS SPECIFICATIONS - FOR ADJUSTMENT OF DIFFERENTIAL PRELOAD (F1CJA)
| Thickness mm (in) | Identification | Thickness mm (in) | Identification |
|---|---|---|---|
| 0.24 (0.009) | 0.80 (0.032) | ||
| 0.28 (0.011) | 0.84 (0.033) | ||
| 0.32 (0.013) | 0.88 (0.035) | ||
| 0.36 (0.014) | 0.92 (0.036) | ||
| 0.40 (0.016) | 0.96 (0.038) | ||
| 0.44 (0.017) | 1.00 (0.039) | ||
| 0.48 (0.019) | 1.04 (0.041) | ||
| 0.52 (0.021) | 1.08 (0.043) | ||
| 0.56 (0.022) | 1.12 (0.044) | ||
| 0.60 (0.024) | 1.16 (0.046) | ||
| 0.64 (0.025) | 1.20 (0.047) | ||
| 0.68 (0.027) | 1.24 (0.049) | ||
| 0.72 (0.028) | 1.28 (0.050) | ||
| 0.76 (0.030) | 1.32 (0.052) |
ADJUSTING SHIMS SPECIFICATIONS - FOR ADJUSTMENT OF DIFFERENTIAL PRELOAD (W1CJA)
| Thickness mm (in) | Identification | Thickness mm (in) | Identification |
|---|---|---|---|
| 0.56 (0.022) | 1.32 (0.052) | ||
| 0.60 (0.023) | 1.36 (0.054) | ||
| 0.64 (0.025) | 1.40 (0.055) | ||
| 0.68 (0.027) | 1.44 (0.057) | ||
| 0.72 (0.028) | 1.48 (0.058) | ||
| 0.76 (0.030) | 1.52 (0.060) | ||
| 0.80 (0.032) | 1.56 (0.061) | ||
| 0.84 (0.033) | 1.60 (0.063) | ||
| 0.88 (0.035) | 1.64 (0.065) | ||
| 0.92 (0.036) | 1.68 (0.066) | ||
| 0.96 (0.038) | 1.72 (0.068) | ||
| 1.00 (0.039) | 1.76 (0.069) | ||
| 1.04 (0.041) | 1.80 (0.071) | ||
| 1.08 (0.043) | 1.84 (0.072) | ||
| 1.12 (0.044) | 1.88 (0.074) | ||
| 1.16 (0.046) | 1.92 (0.076) | ||
| 1.20 (0.047) | 1.96 (0.077) | ||
| 1.24 (0.049) | 2.00 (0.079) | ||
| 1.28 (0.050) | |||
ADJUSTING SHIMS SPECIFICATIONS (FOR ADJUSTMENT OF REDUCTION GEAR PRELOAD)