Home/Mercury/Mariner/Mercury Mariner II (2007-2010)/Repair manual/Engine Control Systems/Acceleration Control System - (Hybrid): Specifications
Contents Wiring diagrams Section: Engine Control Systems All sections

Acceleration Control System - (Hybrid): Specifications Mercury Mariner II

Engine Control Systems 1 illustration

TORQUE SPECIFICATIONS

DescriptionNm
Accelerator pedal bolts9
Accelerator pedal bracket bolt (passenger compartment)8
Accelerator pedal bracket bolts (engine compartment)9

TORQUE SPECIFICATIONS

The acceleration controls consist of the

  1. accelerator pedal and bracket assembly.

The engine management system electronically operates the throttle of the engine in response to throttle pedal movements initiated by the driver. In the event of a system failure, the engine management system provides a "limp home" mode which allows the car to be driven with limited performance.

Refer to the Introduction - Gasoline Engines article.

Scheme 5

Scheme 5: Accelerator Pedal and Bracket
ItemPart NumberDescription
114A464Accelerator pedal electrical connector
2W500300Accelerator pedal bolt (3 required)
39F836Accelerator pedal bracket bolt (2 required)
49D823Accelerator pedal bracket
59F836Accelerator pedal
6W706391Accelerator pedal bracket bolt