Selector Lever Cable Adjustment
- Place the floor shift selector lever in the Overdrive (Circle D) position.
- Disconnect the selector lever cable end from the manual lever.
- Place the manual lever in the Overdrive (Circle D) position. Rotate the manual lever counterclockwise to the PARK position. Rotate the manual lever clockwise 3 detents to the Overdrive (Circle D) position.
- Release the selector lever cable adjuster lock. Pull out on the adjuster lock tabs. Slide the lock over to unlock the selector lever cable.
- Align the selector lever cable end to the manual lever ball stud and install it with the adjuster unlocked.
- Slide the adjuster tab in place to lock the selector lever cable.
Scheme 26
Scheme 26: Selector Lever Cable
| Item | Part Number | Description |
|---|
| 1 | 78061A16 | Trim ring |
| 2 | 78044H06 | Center console compartment tray |
| 3 | 78045A76 | Center console finish panel |
| 4 | 7E395 | Selector lever cable |
| 5 | W707137 | Selector lever cable grommet nuts |
| 6 | | Selector lever cable grommet (part of 7E395) |
| 7 | | Selector lever cable retainer (part of 7E395) |
| 8 | 7G354 | Manual lever |
| 9 | 7B229 | Selector lever cable bracket |
