Home/Mazda/MX-5/Mazda MX-5 NC (2005-2008)/Repair manual/Anti-Lock/traction Control/DTC B1484, C1954 [DYNAMIC STABILITY CONTROL]
Contents Wiring diagrams Section: Anti-Lock/traction Control All sections

DTC B1484, C1954 [DYNAMIC STABILITY CONTROL] Mazda MX-5 NC

Anti-Lock/traction Control 1 illustration ~101 words

DTC B1484, C1954 POSSIBLE CAUSE DTC B1484, C1954 Brake switch system DETECTION CONDITION B1484 Open circuit in the wiring harness between the DSC HU/CM terminal and the brake switch terminal C1954 Brake switch ON signal is not input when the brake fluid pressure sensor signal reaches the specified value. Brake switch ON signal is input even if the signal from the brake fluid pressure sensor is less than the specification. POSSIBLE CAUSE Brake switch malfunction Open circuit in the wiring harness between the DSC HU/CM terminal N and the brake switch terminal D

Scheme 29

Scheme 29: DTC B1484, C1954 [DYNAMIC STABILITY CONTROL]