DTC C1295, C1307, C1937, C1938, C1956 [DYNAMIC STABILITY CONTROL] Mazda MX-5 NC

DTC C1295, C1307, C1937, C1938, C1956 POSSIBLE CAUSE DTC C1295, C1307, C1937, C1938, C1956 Steering angle sensor system DETECTION CONDITION C1295 The steering angle sensor detects an internal abnormality. C1307 The steering angle sensor detects an abnormality in the signal. C1937 The difference between the steering angle calculated by each sensor and the steering angle from the steering angle sensor exceeds specification. C1938 The difference between the steering angle previously received and the steering angle received at this time is not within specification. The signal from the steering angle sensor remains unchanged when the steering angle is turned to the right and left. C1956 There is no signal received from the steering angle sensor. POSSIBLE CAUSE Improper installation or positioning of the steering angle sensor Steering angle sensor malfunction Steering wheel is off-center Poor connection at connectors (female terminal)

Scheme 39