DTC C1222 [DYNAMIC STABILITY CONTROL] Mazda MX-5 NC

Note. DTC C1222 will be detected when a malfunctioning ABS wheel-speed sensor cannot be specified.

DTC C1222 POSSIBLE CAUSE DTC C1222 ABS wheel-speed sensor (slip monitor) system DETECTION CONDITION Difference between any vehicle wheel speeds exceeds specification when driving at a constant speed. ABS control operates for 60 s or more. POSSIBLE CAUSE ABS wheel-speed sensor malfunction (low output, metal shavings on sensor) ABS sensor rotor malfunction (chipping of sensor rotor teeth) Poor installation of ABS wheel-speed sensor and/or sensor rotor (If the sensor rotor is installed at an angle, it may cause output of abnormal wave pattern at high speeds.) Excessive clearance between the ABS wheel-speed sensor and sensor rotor

Scheme 36