TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Center Support-To-Case Bolt | 18-20 (24-27) | |
| Extension Housing-To-Case Bolt | 26.8 (36.3) | |
| Oil Pump-To-Case Bolt | 15.6 (21.1) | |
| Transmission Case-To-Converter Housing Bolt | ||
| Bolt A | 25 (33.8) | |
| Bolt B | 42 (56.9) | |
| INCH Lbs. (N.m) | ||
| 1-2 & 2-3 Shift Valve Cover Plate Bolt | 43-52 (4.9-5.8) | |
| Detent Spring Bolt | 44-52 (5.0-5.8) | |
| Front Valve End Cover Bolt | 43-52 (4.9-5.8) | |
| Lower Valve Body Inside Bolt | 44-52 (5.0-5.8) | |
| Lower Valve Body Plate Bolt | 44-52 (5.0-5.8) | |
| Manual Shaft Body (Valve Body) Bolt | 70-104 (7.9-11.7) | |
| Oil Pump Housing Bolt | 53-78 (5.9-8.8) | |
| Oil Strainer Bolt | 44-52 (5.0-5.8) | |
| Output Speed Sensor Bolt | 35-60 (4.0-6.8) | |
| Pawl Bracket Screw | 53-78 (5.9-8.8) | |
| Pressure Relief Valve Retainer Bolt | 44-52 (5.0-5.8) | |
| Shift Solenoid A & B Bolt | 70-104 (7.9-11.7) | |
| Throttle Cam Bolt | 52-78 (5.9-8.8) | |
| Transmission Range Switch | ||
| Shift Shaft Set Nut | 35 (3.9) | |
| Shift Switch Mounting Bolt | 35-60 (4.0-6.8) | |
| Transmission Wire-To-Transmission Case Retainer Bolt | 48 (5.4) | |
| Torque Converter Clutch Control Valve Plate Bolt | 44-52 (5.0-5.8) | |
| Turbine Speed Sensor Bolt | 52-78 (5.9-8.8) | |
| Upper Valve Body-To-Lower Valve Body Bolt | 44-52 (5.0-5.8) | |
TORQUE SPECIFICATIONS
SPECIFICATIONS
| Item | Specification | |
|---|---|---|
| Transmission Type | SB4A-EL | |
| Gear Ratio | ||
| 1GR | 2.450 | |
| 2GR | 1.450 | |
| 3GR | 1.000 | |
| 4GR | 0.730 | |
| Reverse | 2.222 | |
| Automatic Transmission Fluid (ATF) | ||
| Type | M-III Or Equivalent (e.g. Dexron(R) II) | |
| Capacity (L {US qt, Imp qt}) | 6.4 {6.8, 5.6} | |
| Torque Converter Stall Torque Ratio | 2.300 | |
| Hydraulic System (Number Of Drive/Driven Plates) | ||
| 4GR Clutch | 1/1 | |
| Forward Clutch | 4/4 | |
| Direct Clutch | 3/3 | |
| 4GR Brake | 2/3 | |
| Second Coast Brake | 1/1 | |
| Second Brake | 3/3 | |
| 1st & Reverse Brake | 5/4 | |
| Number Of Front Planetary Gear Teeth | ||
| Sun Gear | 27 | |
| Pinion Gear | 17 | |
| Internal Gear | 60 | |
| Number Of Rear Planetary Gear Teeth | ||
| Sun Gear | 27 | |
| Pinion Gear | 17 | |
| Internal Gear | 60 | |
| Number Of 4GR Planetary Gear Teeth | ||
| Sun Gear | 27 | |
| Pinion Gear | 23 | |
| Internal Gear | 73 | |
AUTOMATIC TRANSMISSION SPECIFICATIONS