Home ReviewsRefund
Home/Mazda/Millenia/Mazda Millenia I (1994-2000)/Repair manual/Automatic Trans/Removal & Installation - A/t: Application
Contents Wiring diagrams Section: Automatic Trans All sections

Removal & Installation - A/t: Application Mazda Millenia I

Automatic Trans ~130 words

APPLICATION

Note. Mazda B2300, B2500, B3000 & B4000 are referred to as B-Series throughout this article.

Vehicle ApplicationTransmission Model
B2300, B2500 & B30004R44E
B40005R55E
MiataNC4A-EL
Millenia
2.3LLJ4A-EL
2.5LGF4A-EL
MPV
2WDRA4A-EL
4WDRA4AX-EL
MX-6 & 626
2.0LLA4A-EL
2.5LGF4A-EL
ProtegeFB4A-EL

TRANSMISSION APPLICATIONS

ModelTransfer Case
B-SeriesBW 1354
MPV 4WDRA4AX-EL

TRANSFER CASE APPLICATIONS

Note. On models with anti-theft radio system, obtain code number from customer to deactivate radio anti-theft system BEFORE disconnecting negative battery cable. To deactivate radio anti-theft system, turn ignition switch to ACC position. Press SCAN and AUTO-M buttons simultaneously until "cod e" is displayed. Press SCAN and AUTO-M buttons again until 4 bars are displayed. Use preset button No. 1 to enter first number. Use preset buttons No. 2, 3 and 4 to set other numbers. Press SCAN and AUTO-M buttons for about 2 seconds until a beep is heard. After 5 seconds, flashing "cod e" will go away and radio will operate.

More articles — Removal & Installation - A/t