Home ReviewsRefund
Home/Land Rover/Range Rover/Land Rover Range Rover III facelift (2005-2009)/Repair manual/Engine Control Systems/Engine Emission Control (4.2L): Specifications
Contents Wiring diagrams Section: Engine Control Systems All sections

Engine Emission Control (4.2L): Specifications Land Rover Range Rover III facelift

Engine Control Systems 2 illustrations

SPECIFICATIONS

DescriptionNm
Exhaust gas recirculation (EGR) modulator valve bolts10
Exhaust gas recirculation (EGR) feed pipe to EGR valve bolt21
Positive Crankcase Ventilation (PCV) valve bolts10

TORQUE SPECIFICATIONS

Scheme 55

Scheme 55: REMOVAL
Scheme 55: REMOVAL

Scheme 56

Scheme 56
Scheme 56
  1. Disconnect the battery ground cable. Refer to «Specifications»(ref-522601) .
  2. Remove the engine cover. Refer to «Engine Cover - 4.2L, Vehicles With: Supercharger»(ref-522605-S40342251052013011500000) .
  3. Release the wiring harness from the PCV valve.
  4. Remove the PCV valve. Disconnect the PCV hose. Remove the 2 bolts. Remove and discard the 2 O-ring seals.

More articles — Engine Emission Control (4.2L)