Home ReviewsRefund
Home/Land Rover/Range Rover/Land Rover Range Rover III facelift (2005-2009)/Repair manual/Engine Control Systems/Engine Emission Control (4.2L): Removal & Installation
Contents Wiring diagrams Section: Engine Control Systems All sections

Engine Emission Control (4.2L): Removal & Installation Land Rover Range Rover III facelift

Engine Control Systems

INSTALLATION

  1. Install the PCV valve. Clean the components. Install the new O-ring seals. Lubricate the O-ring seals with clean engine oil. Tighten the bolts to 10 Nm (7 lb.ft).
  2. Attach the wiring harness.
  3. Install the engine cover. Refer to «Engine Cover - 4.2L, Vehicles With: Supercharger»(ref-522605-S40342251052013011500000) .
  4. Connect the battery ground cable. Refer to «Specifications»(ref-522601) .

More articles — Engine Emission Control (4.2L)