OXYGEN SENSOR LOCATION & IDENTIFICATION
This article provides information on the proper identification of engine bank 1 and engine bank 2 for correct oxygen sensor replacement.
This information identifies engine bank 1 and engine bank 2 on the following engine emission packages
- Bank 1 refers to the cylinder bank that includes cylinder No. 1.
- Bank 2 refers to the cylinder bank opposite bank 1.
- Sensor 1 refers to the sensor that is located before the catalytic converters.
- Sensor 2 refers to the sensor that is located after the catalytic converters.
For cylinder identification, refer to FIRING ORDER & CYLINDER IDENTIFICATION article.
The Oxygen Sensors (O2S) are attached to, and protrude into the vehicle exhaust system. Depending on the engine or emission package, the vehicle may use a total of either 2 or 4 sensors.
Federal Emission Packages: Two sensors are used: upstream (referred to as 1/1) and downstream (referred to as 1/2). With this emission package, the upstream sensor (1/1) is located just before the main catalytic converter. The downstream sensor (1/2) is located just after the main catalytic converter
California Emission Packages: On this emissions package, 4 sensors are used: 2 upstream (referred to as 1/1 and 2/1) and 2 downstream (referred to as 1/2 and 2/2). With this emission package, the right upstream sensor (2/1) is located in the right exhaust downpipe just before the mini-catalytic converter. The left upstream sensor (1/1) is located in the left exhaust downpipe just before the mini-catalytic converter. The right downstream sensor (2/2) is located in the right exhaust downpipe just after the mini-catalytic converter, and before the main catalytic converter. The left downstream sensor (1/2) is located in the left exhaust downpipe just after the mini-catalytic converter, and before the main catalytic converter.
| Sensor Description | Bank/Sensor | Upstream | Downstream | Location |
|---|---|---|---|---|
| Front | 1/1 | Yes | No | In Exhaust Before Catalytic Converter |
| Rear | 1/2 | No | Yes | In Exhaust After Catalytic Converter |
OXYGEN SENSOR IDENTIFICATION (FEDERAL EMISSION PACKAGE)
| Sensor Description | Bank/Sensor | Upstream | Downstream | Location |
|---|---|---|---|---|
| Left Front | 1/1 | Yes | No | In Left Exhaust Before Catalytic Converter |
| Left Rear | 1/2 | No | Yes | In Left Exhaust After Catalytic Converter |
| Right Front | 2/1 | Yes | No | In Right Exhaust Before Catalytic Converter |
| Right Rear | 2/2 | No | Yes | In Right Exhaust After Catalytic Converter |
OXYGEN SENSOR IDENTIFICATION (CALIFORNIA EMISSION PACKAGE)
See also:
• FIRING ORDER & CYLINDER IDENTIFICATION