Contents Section: Communication Devices All sections

Module Communications Network: Other Jaguar XKR I рестайлинг

Driver Information Chart

Note. Use this table to identify DTCs associated with the message center display, then refer to Diagnostic Trouble Code (DTC) index for possible sources and actions.

Note. For definitions of Default Modes, see the foot of this table.

Warning lightMessageDefault ModeDTC
AmberRestricted Performance, DSC fault, DSC system faultEngine speed limited, Reverse throttle progression enabledP1637
AmberRestricted PerformanceEngine speed limited, Reverse throttle progression enabledP1638
AmberRestricted PerformanceEngine speed limited, Reverse throttle progression enabledP1642
AmberRestricted PerformanceEngine speed limited, Reverse throttle progression enabledP1643
AmberCruise not availableCruise control inhibitedP1696
AmberRestricted Performance/Gearbox faultGearbox default to set gearP1796
AmberRestricted Performance/Gearbox faultEngine speed limited, reverse throttle progression enabledP1797

Default mode Definitions

LIMP-HOME MODE

  1. Throttle motor off
  2. Throttle motor relay off
  3. Throttle motor circuit off
  4. Fuel intervention
  5. Cruise control inhibited

LIMP-HOME UNAVAILABLE

  1. Power limitation
  2. Vehicle speed limited to 120 kph
  3. Reverse throttle progression enabled
  4. Cruise Control Inhibited

REVERSE THROTTLE PROGRESSION

  1. Throttle opening limited to maximum 30%

Note. The throttle operation uses the same map as for reverse gear.

ENGINE SPEED LIMITED

  1. Engine runs normally, up to 3000 RPM
  2. Engine speed restricted to 3000 RPM maximum, by fuel cut-off

HIGH IDLE

  1. Throttle valve kept in fixed position by motor
  2. Cruise Control Inhibited

SAFETY REDUNDANCY

  1. Power limitation
  2. Vehicle speed limited to 120 kph
  3. Reverse throttle progression enabled
  4. Cruise Control Inhibited