OVERVIEW
A number of different types of communication network are incorporated into the vehicle wiring harnesses for the transmission of commands and information between control modules. The configuration installed on a particular vehicle depends on the model and equipment level.
Note. The control diagrams shown later in this section are schematics reflecting communications networks fitted to left-hand (LH) vehicles only. For detailed layouts of the various communications networks fitted to left-hand drive (LHD) and right-hand drive (RHD) vehicles, refer to the Electrical Guide.
The communications networks available on the vehicle are shown in the table below.
| Network | Baud Rate |
|---|---|
| Local interconnect network (LIN) bus | 9.6 kbits/s |
| Medium speed controller area network (CAN) bus | 125 kbits/s |
| High speed controller area network (CAN) bus | 500 kbits/s |
| Media Orientated System Transport (MOST) ring | 24 mbits/s |
OPERATION
Refer to the relevant system information for details of system operation.
DESCRIPTION
Refer to the relevant system information for details of system description.
PRINCIPLES OF OPERATION
For a detailed description of the Communications Network, refer to OVERVIEW and SYSTEM OPERATION AND COMPONENT DESCRIPTION .