Home/Infiniti/QX80/Infiniti QX80 I (2013-2014)/Repair manual/Collision/avoidance/Driver Assistance System (Dca): Removal & Installation

Contents

Wiring diagrams Section: Collision/avoidance

Driver Assistance System (Blind Spot Warning & Blind Spot Intervention): Overview
Driver Assistance System (Blind Spot Warning & Blind Spot Intervention): Diagnosis
Driver Assistance System (Blind Spot Warning & Blind Spot Intervention): Removal & Installation
Driver Assistance System (Blind Spot Warning & Blind Spot Intervention): Maintenance
Driver Assistance System (Blind Spot Warning & Blind Spot Intervention): Wiring
Driver Assistance System (Blind Spot Warning & Blind Spot Intervention): Application
Driver Assistance System (Blind Spot Warning & Blind Spot Intervention): Other

All sections

Driver Assistance System (Dca): Removal & Installation Infiniti QX80 I

Collision/avoidance

REMOVAL

Remove front under cover. Refer to " «EXPLODED VIEW»(ref-618043-S16569758662014052700000) ".
Disconnect the connector of ICC sensor.
Remove the bolts.
Remove ICC sensor from front bumper reinforcement. NOTE: Remove ICC sensor from under the bumper.

INSTALLATION

Install in the reverse order of removal.

CAUTION

Always perform the laser beam aiming adjustment and check the operation after the replacement, removal, and installation of ICC sensor. Refer to " DESCRIPTION ".