Home ReviewsRefund
Home/Infiniti/QX80/Infiniti QX80 I (2013-2014)/Repair manual/Collision/avoidance/Driver Assistance System (Adas Control Unit): Wiring
Contents Wiring diagrams Section: Collision/avoidance All sections

Driver Assistance System (Adas Control Unit): Wiring Infiniti QX80 I

Collision/avoidance 3 illustrations

Precautions For Harness Repair

ITS communication uses a twisted pair line. Be careful when repairing it.

Scheme 27

Scheme 27: Precautions For Harness Repair
Scheme 27: Precautions For Harness Repair

Scheme 28

Scheme 28
Scheme 28
  1. Solder the repaired area and wrap tape around the soldered area. NOTE: A fray of twisted lines must be within 110 mm (4.33 in).
  2. Bypass connection is never allowed at the repaired area. NOTE: Bypass connection may cause ITS communication error. The spliced wire becomes separated and the characteristics of twisted line are lost.

Scheme 29

Scheme 29: Component Parts Location
Scheme 29: Component Parts Location

More articles — Driver Assistance System (Adas Control Unit)