Home ReviewsRefund
Home/Hyundai/Genesis/Hyundai Genesis I (2008-2011)/Repair manual/Communication Devices/BCM (Body Control Module): Removal & Installation
Contents Wiring diagrams Section: Communication Devices All sections

BCM (Body Control Module): Removal & Installation Hyundai Genesis I

Communication Devices 7 illustrations ~113 words

Installation

  1. Install the IPM after connecting the connector.
  2. Install the crash pad lower panel.

Scheme 20

Scheme 20: BCM Diagnosis With Scan Tool
Scheme 20: BCM Diagnosis With Scan Tool

Scheme 21

Scheme 21
Scheme 21

Scheme 22

Scheme 22
Scheme 22

Scheme 23

Scheme 23
Scheme 23

Scheme 24

Scheme 24
Scheme 24

Scheme 25

Scheme 25
Scheme 25

Scheme 26

Scheme 26
Scheme 26
  1. It will be able to diagnose defects of IPM with scan tool quickly. Scan tool can operates actuator forcefully, input/output value monitoring and self diagnosis.
  2. Select model and "BCU".
  3. Select the module to check.
  4. Select "Input/output monitoring", if you will check current data of body network system. It provides input/output status of each module.
  5. If you will check each module data operation forcefully, select "Actuation test".
  6. To check the DTC of the each module, select "DIAGNOSTIC TROUBLE CODES"

More articles — BCM (Body Control Module)