Specifications
| Transaxle model | A4CF2 | |
|---|---|---|
| Engine model | Gasoline 2.0L | |
| T/con | 3 elements 2 phases 1 stage | |
| T/con size (ø) | 236 | |
| O/PUMP type | Parachoid | |
| T/M CASE type | Separated | |
| Friction elements | Clutch: 3EA | |
| Brake: 2EA | ||
| OWC : 1EA | ||
| Planetary gear | 2EA | |
| Gear ratio | 1st | 2.919 |
| 2nd | 1.551 | |
| 3rd | 1.000 | |
| 4th | 0.713 | |
| Reverse | 2.480 | |
| Final gear ratio | 3.849 | |
| Fluid pressure balance piston | 2EA | |
| Stall speed | 2,000~2,700 rpm | |
| Accumulator | 4EA | |
| Solenoid valve | 6EA (PWM:5EA, VFS:1EA) | |
| Gear shift position | 7 range (P, R, N, D,3,2, L) | |
| Oil filter | 1EA | |
SPECIFICATIONS CHART
Tightening Torques
| Item | Nm | Kgf.m |
|---|---|---|
| Control cable bracket | 19~23 | 1.9~2.3 |
| Input speed sensor | 10~12 | 1.00~1.2 |
| Output speed sensor | 10~12 | 1.0~1.2 |
| Manual control lever | 17~21 | 1.0~2.1 |
| Inhibitor switch | 10~12 | 1.0~1.2 |
| Oil pan | 10~12 | 1.0~1.2 |
| Valve body mounting bolt | 10~12 | 1.0~1.2 |
| Oil drain plug | 35~45 | 3.5~4.5 |
| Pressure check plug | 8~10 | 0.8~1.0 |
| Front roll stopper bracket subframe bolt | 50~65 | 5.0~6.5 |
| Rear roll stopper bracket subframe bolt | 50~65 | 5.0~6.5 |
| Transaxle mounting sub bracket bolt | 60~80 | 6.0~8.0 |
TIGHTENING TORQUES