Note. Before you troubleshoot, record all freeze data and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).
- Start the engine. Hold the engine speed at 3,000 RPM without load (in neutral) until the radiator fan comes on, then let it idle.
- Check the MAP with a scan tool or the HDS. Is about 36.9 kPa (10.9 in.Hg, 277 mmHg), or 1.1 V or less indicated? YES - Intermittent failure, system is OK at this time. NO - Replace the MAP sensor (see «THROTTLE BODY DISASSEMBLY/REASSEMBLY»(ref-221333-S17353817232006022400000) ).