Note. If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
- Clear the DTCs with the HDS.
- Turn the ignition switch to LOCK (0) and then back to ON (II).
- Wait for at least 6 seconds.
- Check for DTCs with the HDS. Is DTC U1282 indicated? YES - Replace the power seat control unit. • NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections between the power seat control unit and the MICU.