Seating - Power
The driver 6-way power seat is equipped with the following motors
- Height motor
- Recliner motor
- Horizontal motor
Seating - Heated
This system allows independent seat electrical heating of each front seat on demand. The components of the system consist of the following
- seat heater mats (located on the seat cushion and backrest)
- heated seat modules (located under each seat cushion)
- heated seat control switch (located on the center console)
Normal Operation and Fault Conditions
REFER to: SEATS - SYSTEM OPERATION AND COMPONENT DESCRIPTION .
REFER to: SEATS - SYSTEM OPERATION AND COMPONENT DESCRIPTION .
When the seat control switch is activated, voltage and ground is supplied to the applicable seat motor to move the seat to the desired position. There are 2 seat track motors that combine to move the seat cushion horizontally (forward/rearward) and vertically (up/down). There is an additional motor in the seat recliner mechanism to move the seat backrest forward and rearward.
Voltage to the heated seat control switch is supplied from a common circuit. The driver and passenger heated seat modules receive power from the accessory relay whenever the ignition is in the ON position.
REFER to: SEATS - SYSTEM OPERATION AND COMPONENT DESCRIPTION .