Transmission Cooler: Removal & Installation Ford Focus I рестайлинг

Removal

1. Raise and support the vehicle. For additional information, refer to «JACKING AND LIFTING»(ref-234418) .
2. Disconnect the fluid cooler tubes from the transmission fluid cooler. Slide the connector fitting into the cooler line. Press the yellow release button. Pull the connector fitting off the cooler line.
3. Disconnect the transaxle fluid cooler tubes from the transaxle.
4. Remove the transaxle fluid cooler tubes from the vehicle.

Scheme 395

Scheme 396

1. Connect the transaxle fluid cooler tubes to the transaxle fluid cooler. Connect the transaxle fluid cooler inlet tube. Connect the transaxle fluid cooler outlet tube. Pull back on the connector to confirm that it is locked on the cooler line.
2. Install the transaxle fluid cooler tubes to the transaxle.
3. Lower the vehicle.
4. Fill the transaxle with automatic transmission fluid. For additional information, refer to «AUTOMATIC TRANSAXLE/TRANSMISSION»(ref-207762) .