Home ReviewsRefund
Home/Ford/Focus/Ford Focus I (1998-2004)/Repair manual/Automatic Trans/Automatic Transmission Servicing: Removal & Installation
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission Servicing: Removal & Installation Ford Focus I

Automatic Trans 5 illustrations

Removal & Installation

  1. Remove the front bumper cover. Disconnect the front oil cooler tube. (Scheme 234) Disconnect and remove the front cooler tube. (Scheme 235)
  2. Disconnect the rear cooler tube. (Scheme 237) Remove the rear transaxle cooler tube bracket bolt and the cooler tube. (Scheme 236)
  3. Lower the vehicle. Disconnect and remove the integral-to-auxiliary cooler tube. (Scheme 238) To install, reverse the removal procedure.

Scheme 234

Scheme 234
Scheme 234

Scheme 235

Scheme 235
Scheme 235

Scheme 236

Scheme 236
Scheme 236

Scheme 237

Scheme 237
Scheme 237

Scheme 238

Scheme 238
Scheme 238

More articles — Automatic Transmission Servicing