Home/Ford/Focus/Ford Focus I (1998-2004)/Repair manual/Automatic Trans/Automatic Transmission Removal & Installation - A/t: Applic…
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission Removal & Installation - A/t: Application Ford Focus I

APPLICATION

ApplicationTrans. Model
ContinentalAX4N
Contour, Cougar & MystiqueCD4E
Crown Victoria, Grand Marquis, Mustang & Town Car4R70W
EscortF4E-III
Focus4F27E
LS5R55N
Sable & Taurus
3.0L 2VAX4N Or AX4S
3.0L 4V & 3.4LAX4N

AUTOMATIC TRANSAXLE/TRANSMISSION APPLICATIONS

Note. For removal and installation of manual transmission, see appropriate article in CLUTCHES.

WARNINGDeactivate air bag system before performing any service operation. See appropriate AIR BAG RESTRAINT SYSTEMS article in ACCESSORIES & EQUIPMENT. Do not apply electrical power to any component on steering column without first deactivating air bag system. Air bag may deploy.
WARNINGOn vehicles with electronic air suspension, power to air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. Failure to do so can result in inflation or deflation of air springs, which may cause vehicle to shift during servicing.
CAUTIONWhen battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. Before disconnecting battery, see COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION.