Identification
Engine type plate
- "a" approved prescribed type
- "b" engine reference mark
- "c" production serial number
Data
| engine code | DV6UTED4 |
|---|---|
| particle filter | without |
| engine legislative type | 9HU |
| capacity (cc) | 1560 |
| number of cylinders | 4 |
| bore x stroke (mm) | 75 X 88,3 |
| compression ratio | 18/1 |
| max. power (E.E.C.) | 66 KW at 4000 revs/min |
| max. power (DIN) | 90 hp at 4000 rpm |
| maximum torque | 18 m.daN at 1750 rpm |
| emission control standards | EURO 4 |
| fuel | diesel |
| turbocharger | MHI |
| turbocharger pressure | 1 bar |
| injection system | HDI direct injection system |
| make | BOSCH |
| type | EDC 16C34 |
Cylinder head
(1) upper camshaft bearing cap cover
(2) cylinder head
Height of a new cylinder head: "A" = 124 ± 0,05 mm
Cylinder head mounted on the cylinder block by 10 TORX bolts
The exhaust manifold is retained by 10 studs and 10 copper-plated nuts with spacers
Max. permissible bow = 0,05 mm
Maximum permitted grinding 0,4 mm
Cylinder head gasket
Laminated metallic cylinder head gasket
Select the cylinder head gasket in relation to the protrusion of the pistons
"d" thickness identification mark
"e" engine identification
| piston protrusion | thickness | number of notches at "d" | number of notches at "e" |
|---|---|---|---|
| 0,685 to 0,734 mm | 1,35 mm | 1 | 2 + 3 |
| 0,533 to 0,634 mm | 1,25 mm | 1 + 2 | |
| 0,635 to 0,684 mm | 1,30 mm | 1 + 2 + 3 | |
| 0,735 to 0,784 mm | 1,40 mm | 1 + 2 + 3 + 4 | |
| 0,785 to 0,886 mm | 1,45 mm | 1 + 2 + 3 + 4 + 5 |
Cylinder head bolts
The length of bolts under heads "B" must be less than or equal to 149 mm
Timing gear
(3) Induction camshaft
(4) exhaust camshaft
"f" area of marking