Identification
Engine type plate
- "a" approved prescribed type
- "b" engine reference mark
- "c" production serial number
Data
| engine code | DV4TED4 |
|---|---|
| engine legislative type | 8HY |
| capacity (cc) | 1398 |
| number of cylinders | 4 |
| bore x stroke (mm) | 82 x 73,7 |
| compression ratio | 17,8/1 |
| max. power (E.E.C.) | 66,3 KW at 4000 revs/min |
| max. power (DIN) | 90 hp at 4000 rpm |
| maximum torque | 20 m.daN at 2000 rpm |
| emission control standards | L4 |
| fuel | diesel |
| catalytic converter | yes |
| turbocharger | yes |
| turbocharger pressure | 1 bar |
| injection system | HDI direct injection system |
| make | DELPHI |
| type | C6 |
Cylinder head
Cylinder head gasket
Laminated metallic cylinder head gasket
Make ELRING
"d" thickness identification mark
"e" engine identification
| piston protrusion (mm) | thickness (mm) | number of notches at "d" | number of notches at "e" |
|---|---|---|---|
| 0,771 to 0,820 | 1,35 | 1 | 2 |
| 0,6115 to 0,720 | 1,25 | 2 | |
| 0,721 to 0,770 | 1,30 | 3 | |
| 0,821 to 0,870 | 1,40 | 4 | |
| 0,871 to 0,977 | 1,45 | 5 |
Cylinder head tightening
WarningProceed bolt by bolt in the order shown
Pre-tighten to 2 ± 0,2 daNm (in order from 1 to 10)
Tightening torque to 4 ± 0,5 da.Nm (in order from 1 to 10)
Angular tightening to 230 ± 5° (in order from 1 to 10)
Timing gear
(1) Induction camshaft
(2) exhaust camshaft
"f" area of marking
| before top dead centre (BTDC) | -16,80° |
|---|---|
| after bottom dead centre (ABDC) | 6,79° |
| before bottom dead centre (BBDC) | 19,84° |
| after top dead centre (ATDC) | -17,05° |