Home ReviewsRefund Car not listed?
Home/Chrysler/Town & Country/Chrysler Town & Country V рестайлинг (2010-2016)/Repair manual/Mechanical/Specifications
Contents Section: Mechanical All sections

Specifications Chrysler Town & Country V рестайлинг

Mechanical
DescriptionSpecification
Type60° DOHC V-6 24-Valve
Compression Ratio10.2:1
Lead Cylinder#1 Right Bank
Firing Order1-2-3-4-5-6

GENERAL SPECIFICATIONS (1 OF 2)

DescriptionMetricStandard
Displacement3.6 Liters220 Cubic Inches
Bore and Stroke96.0 x 83.0 mm3.779 in. x 3.268 in.

GENERAL SPECIFICATIONS (2 OF 2)

DescriptionSpecification
MetricStandard
Cylinder Bore Diameter - Grade 195.995 mm ± 0.005 mm3.7793 in. ± 0.0002 in.
Cylinder Bore Diameter - Grade 296.005 mm ± 0.005 mm3.7797 in. ± 0.0002 in.
Cylinder Bore Out-of-Round (Max.)0.009 mm0.00035 in.
Cylinder Bore Cylindricity0.014 mm0.0006 in.
Crankshaft Bore Taper* (Max.)0.006 mm0.0002 in.
*Measured over length of bulkhead
Engine Oil Galley Plug**0.0 mm - 2.0 mm0.0 in - 0.0787 in
**Measured proud of machined surface

CYLINDER BLOCK

DescriptionSpecification
MetricStandard
MaterialCast Aluminum Alloy
Piston Diameter (Metal to Metal) - Grade 195.955 mm ± 0.005 mm3.7778 in. ± 0.0002 in.
Piston Diameter (Metal to Metal) - Grade 295.965 mm ± 0.005 mm3.7781 in. ± 0.0002 in.
Piston Diameter (Metal to Coating) - Grade 195.970 - 96.000 mm3.7783 - 3.7795 in.
Piston Diameter (Metal to Coating) - Grade 295.980 - 96.010 mm3.7787 - 3.7835 in.
Clearance at Size Location (Metal to Metal)0.030 - 0.050 mm0.0012 - 0.0020 in.
Clearance at Size Location (Metal to Coating)0.010 - 0.030 mm0.0004 - 0.0012 in.
Piston Weight354 - 364 grams12.487 - 12.840 oz.
Piston Pin Offset0.8 mm0.031 in.
Piston Ring Groove Diameter - No. 188.24 - 88.44 mm3.474 - 3.482 in.
Piston Ring Groove Diameter - No. 286.54 - 86.74 mm3.407 - 3.415 in.
Piston Ring Groove Diameter - No. 389.16 - 89.36 mm3.510 - 3.518 in.

PISTONS

DescriptionSpecification
MetricStandard
TypeFull Floating
Pin Diameter21.9985 ± 0.0015 mm0.86608 ± 0.00006 in.
Clearance in Piston0.002 - 0.011 mm0.0001 - 0.0004 in.
Clearance in Rod0.011 - 0.024 mm0.0004 - 0.0009 in.

PISTON PINS

DescriptionSpecification
MetricStandard
Ring Gap - Number 1 Ring (Top)0.25 - 0.40 mm0.010 - 0.016 in.
Ring Gap - Number 2 Ring (Center)0.30 - 0.45 mm0.012 - 0.018 in.
Ring Gap - Oil Control Ring (Steel Rails)0.15 - 0.66 mm0.006 - 0.026 in.

PISTON RINGS

DescriptionSpecification
MetricStandard
Number 1 Ring (Top)0.025 - 0.083 mm0.0010 - 0.0033 in.
Number 2 Ring (Center)0.030 - 0.078 mm0.0012 - 0.0031 in.
Oil Control Ring (Steel Rails)0.007 - 0.173 mm0.0003 - 0.0068 in.

PISTON RING SIDE CLEARANCE

DescriptionSpecification
MetricStandard
Number 1 Ring (Top)3.00 - 3.20 mm0.118 - 0.126 in.
Number 2 Ring (Center)3.59 - 3.85 mm0.141 - 0.152 in.
Oil Control Ring (Steel Rails)1.930 - 2.083 mm0.076 - 0.082 in.

PISTON RING WIDTH

DescriptionSpecification
MetricStandard
Bearing Clearance (With Crush)0.023 - 0.064 mm0.0009 - 0.0025 in.
Side Clearance0.070 - 0.370 mm0.0028 - 0.0146 in.
Side Clearance (Max.)0.370 mm0.0146 in.
Piston Pin Bore Diameter22.016 ± 0.005 mm0.8668 ± 0.0002 in.
Bearing Bore Out of Round (Max.)0.008 mm0.0003 in.
Total Weight (Less Bearing)546.7 ± 8 grams19.28 ± 0.28 oz.

CONNECTING RODS

DescriptionSpecification
MetricStandard
Diameter71.996 ± 0.009 mm2.8345 ± 0.0035 in.
Bearing Clearance0.024 - 0.050 mm0.0009 - 0.0020 in.
Bearing Clearance (Max.)0.050 mm0.0020 in.
Out of Round (Max.)0.005 mm0.0002 in.
Taper (Max.)0.005 mm0.0002 in.
End Play0.050 - 0.290 mm0.0020 - 0.0114 in.
End Play (Max.)0.290 mm0.0114 in.

CRANKSHAFT MAIN BEARING JOURNALS

DescriptionSpecification
MetricStandard
Diameter59.0 ± 0.009 mm2.3228 ± 0.0035 in.
Bearing Clearance0.023 - 0.064 mm0.0009 - 0.0025 in.
Out of Round (Max.)0.005 mm0.0002 in.
Taper (Max.)0.005 mm0.0002 in.

CONNECTING ROD JOURNALS

DescriptionSpecification
MetricStandard
Bore Diameter - No. 1 Cam Towers32.020 - 32.041 mm1.2606 - 1.2615 in.
Bore Diameter - No. 2, 3, 4 Cam Towers24.020 - 24.041 mm0.9457 - 0.9465 in.
Bearing Journal Diameter - No. 131.976 - 31.995 mm1.2589 - 1.2596 in.
Bearing Journal Diameter - No. 2, 3, 423.977 - 23.9960.9440 - 0.9447 in.
Bearing Clearance - No. 10.025 - 0.065 mm0.00010 - 0.0026 in.
Bearing Clearance - No. 2, 3, 40.024 - 0.064 mm0.0009 - 0.0025 in.
End Play0.075 - 0.251 mm0.003 - 0.010 in.

CAMSHAFT

DescriptionSpecification
Opens2° (ATDC)
Closes82° (ABDC) or 262° (ATDC)
Duration260°
Centerline128°
Note: Units are in crank degrees, using 0.1524 mm (0.006 in.) valve lift as the threshold.

VALVE TIMING-INTAKE VALVES

DescriptionSpecification
Opens59° (BBDC) or 239° (BTDC)
Closes12° (ATDC)
Duration251°
Valve Overlap10°
Note: Units are in crank degrees, using 0.1524 mm (0.006 in.) valve lift as the threshold.

VALVE TIMING-EXHAUST VALVES

DescriptionSpecification
MetricStandard
Gasket Thickness* (Compressed)0.48 - 0.60 mm0.019 - 0.024 in.
Flatness (Head Gasket Surface)0.09 mm0.0035 in.
Valve Seat Angle44.75° ± 0.25° from the valve guide axis
Valve Seat Runout (relative to the valve guide axis) - Intake and Exhaust0.050 mm0.002 in.
Intake Valve Seat Width1.0 - 1.2 mm0.04 - 0.05 in.
Exhaust Valve Seat Width1.41 - 1.61 mm0.055 - 0.063 in.
Guide Bore Diameter (Std.)6.00 - 6.02 mm0.236 - 0.237 in.
Valve Guide Height** - Intake and Exhaust16.05 - 16.55 mm0.632 - 0.652 in.
*Measured at the fire ring, not at the outer edge **Measured from cylinder head valve spring seat surface to top of guide

CYLINDER HEAD

DescriptionSpecification
MetricStandard
Face Angle45.25° ± 0.25°
Head Diameter - Intake39.0 ± 0.100 mm1.535 ± 0.004 in.
Head Diameter - Exhaust30.0 ± 0.100 mm1.181 ± 0.004 in.
Length-Intake (Overall)116.54 ± 0.23 mm4.588 ± 0.009 in.
Length-Exhaust (Overall)115.6 ± 0.23 mm4.551 ± 0.009 in.
Stem Diameter - Intake5.968 ± 0.009 mm0.2350 ± 0.0004 in.
Stem Diameter - Exhaust5.961± 0.009 mm0.2347 ± 0.0004 in.
Stem-to-Guide Clearance - Intake (New)0.023 - 0.061 mm0.0009 - 0.0024 in.
Stem-to-Guide Clearance - Exhaust (New)0.030 - 0.068 mm0.0012 - 0.0027 in.
Stem-to-Guide Clearance-Intake (Max., Rocking Method)0.29 mm0.011 in.
Stem-to-Guide Clearance - Exhaust (Max., Rocking Method)0.37 mm0.015 in.
Valve Lift-Intake (Zero Lash)10.3 mm0.406 in.
Valve Lift-Exhaust (Zero Lash)10.0 mm0.394 in.
Valve Stem Tip Height* - Intake52.4 - 53.5 mm2.063 - 2.106 in.
Valve Stem Tip Height* - Exhaust51.8 - 52.9 mm2.039 - 2.083 in.
*Valve tip to aluminum spring seat boss

VALVES

DescriptionSpecification
MetricStandard
Free Length - Intake AND Exhaust (Approx.)52.5 mm2.067 in.
Spring Force - Intake AND Exhaust (Valve Closed)295 ± 13 N @ 40.0 mm66 ± 3 lbs. @ 1.57 in.
Spring Force - Intake (Valve Open)688 ± 31 N @ 10.3 mm155 ± 7 lbs. @ 0.4055 in.
Spring Force - Exhaust (Valve Open)676 ± 30 N @ 10.0 mm152 ± 6 lbs. @ 0.3937 in.
Number of Coils - Intake AND Exhaust9.35
Wire Diameter - Intake AND Exhaust3.18 x 3.99 mm (ovate)0.125 x 0.157 in. (ovate)
Installed Height - Intake AND Exhaust (Spring seat top to bottom of retainer)40.0 mm1.575 in.

VALVE SPRING

DescriptionSpecification
MetricStandard
(Note: At Normal Operating Temperatures)
Pressure @ Curb Idle Speed*34.7 kPa Min.5 psi Min.
Pressure @ 600 - 1200 RPM34.7 (warm) - 958.0 (cold) kPa5 (warm) - 139 (cold) psi
Pressure @ 1201 - 3500 RPM206.8 (warm) - 958.0 (cold) kPa30 (warm) - 139 (cold) psi
Pressure @ 3501 - 6400 RPM427.0 (warm) - 958.0 (cold) kPa62 (warm) - 139 (cold) psi
*CAUTION: If oil pressure is zero at idle, DO NOT run engine at 3000 RPM.

OIL PRESSURE

More articles — 3.6L Engine - Service Information