Home ReviewsRefund
Home/Chevrolet/Uplander/Chevrolet Uplander I (2004-2008)/Repair manual/Testing & Diagnostics/P0132
Contents Wiring diagrams Section: Testing & Diagnostics All sections

P0132 Chevrolet Uplander I

Testing & Diagnostics
  1. DTCs P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0125, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0220, P0442, P0443, P0446, P0449, P0451, P0452, P0453, P0454, P0455, P0464, P0496, P2135, P2A00 are not set.
  2. DTCs P0420 and P2A01 are not commanding fuel.
  3. The system voltage is between 9-18 volts.
  4. The scan tool special functions are not active.
  5. The TP sensor parameter is between 3-40 percent.
  6. The Air Fuel Ratio parameter is between 12:1-16.5:1.
  7. The above conditions must be met for at least 3 seconds.

More articles — Engine Controls - 3.9L - DTC P0011 to P0420