P0116 Chevrolet Uplander I

The engine coolant temperature (ECT) sensor is a variable resistor that measures the temperature of the engine coolant. The control module supplies 5 volts to the signal circuit and a ground for the ECT low reference circuit. When the engine coolant temperature is low, the sensor resistance is high. When the engine coolant temperature is high, the sensor resistance is low. The control module uses this High Side Coolant Rationality test to determine if the ECT input is skewed high. The internal clock of the control module will record the amount of time the ignition is OFF. At restart the control module will compare the temperature difference between the ECT and the intake air temperature (IAT). Before failing this test, the control module will perform a calculation to determine the presence of an engine block heater. If the control module detects that the temperature difference between the ECT and the IAT is not within the calibrated range after the ignition OFF time, DTC P0116 sets.