Home ReviewsRefund
Home/Audi/A4/Audi A4 B8 (2007-2012)/Repair manual/Seat Frames (sedan)/POWER HEADRESTS OVERVIEW
Contents Wiring diagrams Section: Seat Frames (sedan) All sections

POWER HEADRESTS OVERVIEW Audi A4 B8

Seat Frames (sedan) 1 illustration ~144 words

POWER HEADRESTS OVERVIEW

Note. The illustration does not show the backrest cover and upholstery.

Scheme 89

Scheme 89: POWER HEADRESTS OVERVIEW
Scheme 89: POWER HEADRESTS OVERVIEW
  1. Front Backrest
  2. Headrest Guide Without release button Removing and installing, refer to «HEADREST GUIDE»(/audi/a4/b8-2007-2012/remont/seats/#seat-frames-sedan__headrest-guide) Always installed on right side of backrest
  3. Wiring With connector Connected firmly to the headrest
  4. Headrest Driver side: with driver head restraint adjustment motor -V103- / driver headrest height adjustment sensor -G217- Front passenger side: with front passenger headrest adjustment motors -V104- / front passenger headrest height adjustment sensor -G282- Removing and installing, refer to «POWER HEADRESTS»(/audi/a4/b8-2007-2012/remont/seats/#seat-frames-sedan) Only the seat cover, the cushion and the complete body can be replaced on the head restraint. It is not possible to disassemble the base plate or replace the electrical and electronic components installed inside.
  5. Headrest Guide With release button Removing and installing, refer to «HEADREST GUIDE»(/audi/a4/b8-2007-2012/remont/seats/#seat-frames-sedan__headrest-guide) Always installed on left side of backrest