BRACKET WITH HINGES, NON-LOCKING COVER
Special tools and workshop equipment required
- Special Pop Rivet Pliers V.A.G 1753A
- Drill
- Protective eyewear
Removing
Remove center armrest. Refer to CENTER ARMREST, SPLIT BACKREST .
Remove the backrest trim. Refer to BACKREST TRIM .
Remove the backrest cover. Refer to BACKREST COVER .
Note. Place plastic film between the bench seat and backrest to protect against metal shavings.
| WARNING | Risk of injury! Wear protective eyewear. |
Drill out rivet -3-.
Remove the nuts -4- (quantity: 2).
Remove the bracket -1- from the threaded pins -5- and pull it out of the profile -2- in the direction of the -arrow-.
Installing
Install in reverse order of removal.