Home ReviewsRefund
Home/Audi/A3/Audi A3 8P facelift 2 (2008-2013)/Repair manual/Mechanical/2.0L - Engine Assembly - Engine Code(s): Cbfa & Ccta: Adjus…
Contents Wiring diagrams Section: Mechanical All sections

2.0L - Engine Assembly - Engine Code(s): Cbfa & Ccta: Adjustments Audi A3 8P facelift 2

Mechanical

SUBFRAME MOUNT, CHECKING ADJUSTMENT

Procedure

Check dimensions on right mount for engine and transmission

  1. Both bolt heads -2- must be parallel to edge of engine mount Support arm -3-.
  2. A distance of -x- = 16 mm must be present between engine mount -1- and engine Support -4-.

Note. Distance -x- = 16 mm can also be checked with corresponding round stock.

Adjust the subframe if the distance measured is too small or too large. Refer to SUBFRAME MOUNT, ADJUSTING .

More articles — 2.0L - Engine Assembly - Engine Code(s): Cbfa & Ccta