Removing Backrest
Note. As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.
Note. To carry out this work a zip fastener is required. This is not included in the upholstery but is ordered separately. 6 mm zip fastener part number: 3533976 is used and in some cases zip fastener 4 mm, part number: 9459316
Scheme 352
Fold up the cushion.
Remove
- the side cushion. See «Side cushion»(ref-441129-S14842222192011121500000) . Disconnect the connector by the hinge
- screw mounting by the hinge
- the screw for the seatbelt end mounting.
Remove the strap(s) for the fold-down mechanism and seat belt buckles (hooked onto the lower edge of the backrest).
Lift out the backrest.