Home/Volvo/S80/Volvo S80 I (1998-2003)/Repair manual/Removal & Installation/Engine Control - Removal, Overhaul & Installation: Specific…
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Control - Removal, Overhaul & Installation: Specifications Volvo S80 I

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Brake Caliper (Rear) Mounting Bolt (S80)44 (60)
Camshaft Position Sensor Housing Bolt12 (17)
Cross Stay-To-Shock Tower Bracket59 (80)
Driveshaft-To-Differential Flange Mounting Bolts (S70 AWD & V70 AWD) (1)
Stage 172 INCH. Lbs. (8)
Stage 222 (30)
Engine Coolant Temperature Sensor15 (20)
Engine Torque Rod Bracket Bolt59 (80)
EVAP Canister(C70, S70 & V70)
Bolts18 (25)
Nut15 (20)
Exhaust System Bolts18 (25)
Fuel Level Sensor Nut
C70 S70 & V7022 (30)
S8044 (60)
Fuel Pump Unit
C70. S70 & V70 (Nut)30 (40)
S80 (Bolt)44 (60)
S80
Large Nut30 (40)
Small Nut22 (30)
Fuel RailMounting Bolt (S80) (2)33 (45)
Fuel Tank Retaining Strap Bolt (C70. S70 & V70)18 (25)
Heated HO2S33 (45)
Intake Manifold Bolts15 (20)
Jack Attachment Bolt(S70 AWD & V70 AWD)
Stage 177 (105)
Stage 290 Degree Turn
Knock Sensor15 (20)
Longitudinal Stay Bracket Bolt(S70 AWD & V70 AWD) (2)
Stage 148 (65)
Stage 260 Degree Turn
Parking Brake Cable Mount Bolt (S80)18 (25)
Rear Axle Member Bolt (S70 AWD & V70 AWD) (3)
Outer59 (80)
Center37 (50)
Seat Back Rest & Hinge Mount Bolt (V70 & S80)37 (50)
Seat Belt Mount (S80)35 (48)
Shock Tower Bolts37 (50)
Thermostat Housing Bolt13 (17)
Throttle Body Bolts13 (17)
Wheel Lug Nuts81 (110)
INCH Lbs. (N.m)
Accelerator Pedal Module (Sensor) Bolt89 (10)
Brake Disc (Rear) Locating Bolt (S80)89 (10)
Camshaft Position Sensor Bolt
S80 Non-Turbo89 (10)
C70, S70 Turbo & V70 Turbo106 (12)
Camshaft Reset Valve (Variable Valve Timing)89 (10)
Carbon Filter (EVAP) Canister (S80)89 (10)
Engine Speed (RPM) Sensor89 (10)
Fuel Mounting Rail-To-Fuel Rail (S80)53 (6)
Fuel Rail Bolt (C70, S70 & V70)89 (10)
Fuel Filler Pipe Flange (C70, S70 & V70)89 (10)
Fuel Tank Reinforcing Plate Bolt (S80)89 (10)
Fuel Tank Heat Deflector Plate Bolt (S80)48 (5)
Ignition Coil Bolt89 (10)
Retaining Strap Bolt89 (10)
Timing Belt Cover Bolt
Front106 (12)
Upper71 (8)
(1) Use new bolts during reassembly. Bolts are used for driveshaft balancing. Note installed position BEFORE removal. During installation NEW bolts of the same length and color marking MUST be installed in same location or driveshaft will be out of balance. (2) Use new bolts during reassembly. (3) When installing rear axle member assembly, check for correct installation distances. See INSTALLATION (S70, V70 AWD & V70 XC) under FUEL TANK (EXCEPT S80).Apply Threadlock (1161351-0), or equivalent, to bolt threads.
(1)Use new bolts during reassembly. Bolts are used for driveshaft balancing. Note installed position BEFORE removal. During installation NEW bolts of the same length and color marking MUST be installed in same location or driveshaft will be out of balance.
(2)Use new bolts during reassembly.
(3)When installing rear axle member assembly, check for correct installation distances. See INSTALLATION (S70, V70 AWD & V70 XC) under FUEL TANK (EXCEPT S80).Apply Threadlock (1161351-0), or equivalent, to bolt threads.

TORQUE SPECIFICATIONS