Opening secondary locking, Example 4 Volvo S80 I

Opening secondary locking, Example 4

Socket type housings p/n 1362989-4, and corresponding pin housings

Scheme 1444

Hold the housing as shown and open the secondary locking as follows

1. Using a small screwdriver press the catches on the secondary locking in from the side shown in the illustration. A "click" will be heard.

When the secondary locking is pressed in the locking cover slides open and the cavities open.

Follow instructions in Cavity opening with one extraction groove .

Crimp new cable terminal as in. See Place the cable terminal in the tool .

Note. Note The housing secondary locking must be in the open position as in Open the housing .

1. Insert the new cable terminal in the housing from the cable side checking that it is in the correct cavity. A "click" indicates that the locking tab has engaged.

Scheme 1445

Hold the housing as shown and close it by activating the secondary locking as follows

1. Using a small screwdriver press in the catches on the secondary locking from the opposite side. A "click" indicates that the secondary locking has engaged.