Passenger door module (PDM) Volvo S80 I

Passenger door module (PDM)

See Diagnostic functions, passenger door module (PDM) .

This function can be used to continuously read off the values and status of the control module's input and output signals.

The key must not be in the ignition when reading off the status of the door mirror lamp.

Lock cable M1, status, is active while locking the central locking

Lock cable M2, status, is active while unlocking the central locking and / or deadlocks

Lock cable M3, status, is active while locking the deadlocks

The following parameters can be read off

1. The status of the front passenger window up-control
2. The status of the front passenger window down-control
3. The status of the front passenger window auto-control
4. The status of the up-motor for the power window
5. The status of the down-motor for the power window
6. Lock cable M1, status
7. Lock cable M2, status
8. Lock cable M3, status
9. The status of the door open warning lamp (does not apply to all cars)
10. The status of the control for the door mirror
11. Defroster, status
12. Door mirror lamp, status
13. Outside temperature, value NOTE: The outside temperature can only be read off from the control module on the right-hand side of the car.
14. Power supply, value
15. Signal supply, value
16. Door mirror position X axis, value (does not apply to all cars)
17. Door mirror position Y axis, value (does not apply to all cars).