Ignition key/Remote control, adding/replacing/erasing
Note. The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.
| CAUTION | When replacing an ignition key or remote control, the new unit must be programmed. Both software and the code on the packaging are required to add a new remote control. Only the software is required to erase a remote control. Only the software is required to add an ignition key. |
Ignition key programming/erasing
Order the software. See 8645454
Remote control programming/erasing
Order the software. See 8645455
Finishing
Check the function after programming an ignition key or remote control.