Programming entry position Volvo C70 I

Programming entry position

1. Adjust the front-rear position of the seat to the most forward position using the control button.
2. Move the seat backward approximately 5 mm.
3. Press the MEM button (4) and hold down (otherwise the seat moves forward with the following command).
4. Fold the backrest forward using the handle (5). Hold the handle up.
5. Press the MEM buttons 1, 2 and 3 at the same time (1, 2 and 3).

Note. Do not release the fold handle and other buttons.

Wait at least 5 seconds.

Conclusion

The preset entry position is now programmed into the control module.