Engine Control Module (ECM) Diagnostic Trouble Codes - 2 of 8: Maintenance Volvo C30 I рестайлинг

RESETTING ADAPTATION

1. Switch off the engine.
2. Ignition on. Reset the adaptations by pressing the VCT2000 symbol. This is done so that the system can be started from normal. As a result, it is easier to see if the adaptations are going up or down.

1. Continue Refer to «START ADAPTATIONS»(ref-500314-S41392777992012091100000)

1. Switch off the engine.
2. Ignition on. Reset the adaptations by pressing the VCT2000 symbol. This is done so that the system can be started from normal. As a result, it is easier to see if the adaptations are going up or down.

1. Continue Refer to «START ADAPTATIONS»(ref-500314-S28909273402012091100000)