FASTENER TIGHTENING SPECIFICATIONS
| Component | Fastener Size | Nm |
|---|
| Double Check Valve to Intake Manifold Bolt | | 3 |
| Double Check Valve Pipe Clamp to Intake Manifold Bolt | | 3 |
| Engine Control Module Bracket Bolt (1) | | 7 |
| Fuel Pressure Sensor to Pressure Sensor Tester VAS 6394 | | 22 |
| Heat Shield to Lower Air Filter Housing Bolt | | 3 |
| Intake Air Temperature Sensor to Intake Manifold Bolt | | 5 |
| Intake Flap Motor with Intake Manifold Runner Position Sensor to Intake Manifold Bolt | | 7 |
| Intake Manifold to Cylinder Head Bolt/Nut | | 10 |
| Intake Manifold Support to Bonded Rubber Bushing Nut | | 10 |
| Intake Manifold Support to Cylinder Block Bolt | | 25 |
| Lower Air Filter Housing to Engine Cover/Upper Air Filter Housing Bolt | | 3 |
| Mass Airflow Sensor to Engine Cover/Upper Air Filter Housing Bolt | | 3 |
| Plenum Chamber Bracket Nut (1) | | 6 |
| Pressure Sensor Tester VAS 6394 to Fuel Rail | | 22 |
| Stud Bolt (for the Intake Manifold) to Cylinder Head | | 10 |
| Throttle Valve Control Module to Intake Manifold Bolt | | 7 |
| (1) Passat |
